Lean pipe manufacturer analysis Lean pipe, also known as wire rod, is a steel-plastic composite pipe with an outer plastic-clad layer, a middle metal layer and an inner layer of anti-rust layer. The current process is that the plastic layer is directly attached to the metal layer.
The inner wall of the steel pipe is anti-corrosion coating, the standard wire rod material diameter is 27.8mm±0.2mm, and the steel pipe wall thickness is 0.7mm, 0.8mm, 1.0mm, 1.2mm and 2.0mm.
Wire Bar Products is a modular system of pipe fittings and wire bar connectors that can transform any creative idea into a personalized, realistic structure and is extremely simple and quick to manufacture at low cost.
The wire rod needs to be designed with load capacity in mind, and the strength can be increased by adding fulcrums, connecting pieces, and using double plastic-coated tubes in parallel.
When designing the structure, confirm that the main load acts directly on the pipe fittings rather than on the connecting pieces. The horizontal distance can be set up at a maximum interval of 600mm (the specific structure is designed according to the specific weight), and the building block type assembly method is adopted. Supported by uprights perpendicular to the ground, and every 1200mm, the vertical uprights should directly reach the ground. For products with casters, the underframe should be a double-pole parallel structure.
The horizontal distance is 600mm, and the safe load-bearing capacity of a single wire rod and slide is 30kg. The rod must be a whole, and the connecting rod can be segmented.
The width (center distance) of each column of the sliding rack is the width of the placed turnover box + 60mm; the height of each layer is the height of the placed turnover box + 50mm, the slope angle of the slideway is determined, and the general slope of the slideway is 5 ~8 degrees, when placing precision materials, heavy materials and the bottom of the turnover box is relatively smooth, the inclination angle should be smaller.
When designing wire rod products, you should consider the usage situation in detail. If you do not need to move, try not to design them as products with casters. The wire rod products are also known as flexible. Flexible disassembly and assembly, no welding, practical for automobiles, electronics, printing, clothing, etc., dust-proof workshop, installation is more hygienic and pollution-free.
