Installation instructions of metal shelves The installation steps of metal shelves are as follows: Check the materials: open the accessory box, check whether the beams, columns, screws, lamina panels and installation tools are complete 1. Install the column and beam: first, embed the triangle piece into the bottom of the column, aim at the hole position, and screw in the screw. Then, install the top and bottom laminate, it is recommended that the bottom laminate be 10 cm from the ground, to facilitate later movement and avoid moisture
1. Fixed laminate: Align the hole position on the laminate and the hole position on the column corner steel, and fix them with screws. After the whole level is fixed, fix each point with a screwdriver.
Install the pad: After installing the laminate, install the pad to ensure that each pad is fixed. Check and fix the screws: Check the fixing screws layer by layer to ensure that all the screws are fastened to .
Note for the maintenance and use of metal shelves: Regular inspection: Regular inspection of the fasteners and structure of the shelf to ensure that there is no loose or damaged . Cleaning: Keep the shelves clean and clean the surface of the profiles regularly to prevent dust accumulation .
With the above steps, you can successfully complete the installation of the metal shelves, and ensure its stability and safety.
